New Settings for the Mk2 Sail

Brett Beyer has updated our cheat sheet for sailing upwind in choppy water, and the changes are shown in red. It's interesting to note that:

• there are no changes to how you play the mainsheet in any condition,
• there are no changes to sailing in 5 knots or less, and
• the most changes are for setting the outhaul.

Brett can be contacted here. When we give a clinic, we print and laminate this chart so that people can tape it to their Laser. Here's your copy...

For questions and comments from Brett, click on comments...

Sailing Upwind in Choppy Conditions

2012 (c) Brett Beyer

Waves. They are our friend downwind and our enemy upwind. They add another layer of technical skills and it’s little wonder that waves separate the fleet very quickly. Anytime you are sailing far enough from shore, or in a sea breeze, we are exposed to waves. The size of the waves often determines the type of rig set-up. Although the Laser has a simple rig, we still have the ability to pull a particular shape into the sail. For example, in flatter water, we may want a flattish sail that is set up for low drag and to control whatever the wind strength is. However, in choppy water, we want a sail that is more forgiving to changes in steering angles, but still has enough ‘torque’ to push through waves upwind. The sail will look (and feel) very different for 8 knots flat water compared to 8 knots choppy water. So here is a clue straight away…..ask yourself, are you setting the sail for flat water or for choppy water? Well now you have to have a definition of “choppy water”.

I think the definition of chop is when going upwind, that the waves either make you change direction (by slapping the bow away) or slowing you down (by slamming into the bow). Either of these situations is damaging to speed and height and we now have to steer more aggressively around the waves. But now the rig must accommodate this extra steering range. It must be broadened in its ability to be efficient both when (momentarily) high and low. How? Add more depth to the entry. That is Cunningham. Most people are reluctant to use this as we associate it with depowering on a windy day. This is true. So we need to apply just enough Cunningham to add entry depth, and no more. Similarly, we use soft vang to achieve the same result. A straighter mast also means a deeper entry so we make sure we are not too hard on the vang in winds less than say 12 knots. With a softer vang, we now have full control of sail shape with mainsheet tension alone. It becomes very simple. In bigger waves, ease a touch of sheet. This straightens the mast, adds depth and power and relaxes the leech a little. Perfect for finding that extra punch in bigger waves on lighter wind days. As the wind strength increases, just add more and more downhaul and vang in equal portions.

It is not easy to quantify the above amounts, but is intended to give you a guide as to what you should be focusing on for best rig set up to match the wave conditions. It is not appropriate to produce a similar guide for downwind as waves are largely sailed in a technical way where sail shape is not the major factor.

Now that the rig matches the wave conditions, all that is left is to steer correctly. I can hear you asking the question now, but this is best left to another time!!